Windows
7/Vista/XP (32 Bit) - 12.9MB
o For USB and Serial interface
o All except Acoustic
Pulse Recognition and Projected Capacitive.
Windows
2000/XP/Vista (32 Bit) - 3.5MB
o For USB and Serial interface
o This driver does not
support full-screen DOS applications.
Windows
XP Embedded - USB Interface
o All except Acoustic
Pulse Recognition and Projected Capacitive
Windows
XP Embedded - Serial Interface
o All except Acoustic
Pulse Recognition and Projected Capacitive
Windows
CE 6.0 Embedded - USB and Serial Interface
o All except Acoustic
Pulse Recognition and Projected Capacitive
Windows
CE 5.0 Embedded - USB and Serial Interface
o All except Acoustic
Pulse Recognition and Projected Capacitive
Windows
CE 4.2 Embedded - USB and Serial Interface
o All except Acoustic
Pulse Recognition and Projected Capacitive
Windows
CE 4.0 and 4.1 Embedded - Serial Interface
o All except Acoustic
Pulse Recognition and Projected Capacitive
Windows
CE 4.1 Embedded - USB Interface
o All except Acoustic
Pulse Recognition and Projected Capacitive
Windows
CE 4.0 Embedded - USB Interface
o All except Acoustic
Pulse Recognition and Projected Capacitive
Windows
98/Me
o This driver does not
support full-screen DOS applications.
o The calibration tool
is contained within the driver software.
Windows
95/98/Me Serial
o Supports up to 4 monitors.
To use touchscreens with DOS applications on this
operating system, you must use the Windows 3.1/DOS
drivers, not this driver.
o The calibration tool
is contained within the driver software.
Windows
NT Serial
o For Windows NT 4.0;
version 4.0 with updated User Interface for Single
Monitor applications. For multiple monitor applications,
use version 3.10C.
o The calibration tool
is contained within the driver software.
DOS
and Windows 3.x
o UnZIP to blank floppy
with WinZip or "PKUNZIP -d DWDSK a:",
then run A:\INSTALL.
o The calibration tool
is contained within the driver software.
Diagnostics
Programs
o Carroll Touch Infrared
Serial Interface Diagnostics.
(Please read the Elo Touch End
User Agreement before downloading Elo Touch Drivers)
|
| MicroTouch
Controllers 7.13 Build 1, Windows 7/Vista/XP/2000
- 3.13MB
3M MicroTouch Controllers CX, DX (DST), EX, RX (SC400, SC500, SC800)
TouchWare
Driver, Release 5.64 SR5
This software supports
MicroTouch™ Touch Screen Controllers (EX
II, SMT3, MT3000, MT410, MT510, new SC Series)
Windows
XP/Vista/2000
o The MT 7.12 Driver Supports
both ClearTek Capacitive Touch with an EXII Controller,
Resistive Touch with either SC400, SC500 or SC800
Controllers, Serial, and USB - User
Documentation
Windows
XPe
o The MT 7.11 Driver Supports
both ClearTek Capacitive Touch with an EXII Controller
and Resistive Touch with either SC400, SC500 or
SC800 Controllers - User
Documentation
MicroTouch™
USB HID Calibration Tool 7.01
The HID Calibration Tool provides support for
MicroTouch touch screen operation on the Microsoft®
Windows® 98SE, Me, 2000, XP operating systems.
This tool works with MicroTouch controllers that
support HID including the new SC Series USB HID
compatible 4-, 5-, 8-wire resistive controllers.
Use this calibration tool for optimization of
touch performance to the MicroTouch™ touch
screen 1% TPE accuracy specification.
Legacy Touch Drivers
| Technology |
Controller Supported |
Drivers Avilable |
| Legacy ClearTek Capacitive |
EX II, SMT3, MT3000,
MT410, MT510, new SC Series |
TW
5.64 SR6 (Win XP/2000/NT/9x/ME)
TW 5.62
(Win XP/2000/NT/9x/ME)
Windows
CE.NET 4.x |
| Legacy 3M MicroTouch Resistive |
| Legacy 3M Dynapro Resistive |
SC3 Serial and SC4 Serial or
USB |
UPDD
3.8.34 (Win XP/2000/NT/9x/ME) |
| Legacy 3M Dynapro/Microtouch
Resistive |
SC3 Serial and SC4 Serial or
USB |
UPDD
3.8.54 (Win XP/2000/NT/9x/ME) |
| NFI |
NFI 3, NFI 4 -
10.4" and larger touch screens supported |
NFI
(Win NT/9x/3.1/DOS)
- Win NT Ver. 1.6.2, Release 3.0.0
- Win 9X Ver. 1.6.2, Release 3.0.0
- Win 3.1/DOS: Ver. 4.2.3, Release 3.0.0 |
| NFI |
NFI 3, NFI 4 -
8.4" touch screens supported |
NFI
(Win NT/9x)
- Win NT: Ver. 1.7.0, Release 4.0.0
- Win 9X: Ver. 1.7.0, Release 4.0.0 |
| NFI |
NFI 3, NFI 4 - All Sizes |
NFI
(Win XP/2000) |
| |
|
|
| |
|
|
TouchWare
3.4 for Windows 3.1x and DOS
o Compatible with
TruePoint, ClearTek, TouchTek, and TouchPen
TouchWare
3.4 for DOS
o Compatible with
TruePoint, ClearTek, TouchTek, TouchPen, and ThruGlass.
If you're using this driver with ThruGlass, please
download TGCal.
TouchWare
for NT 3.5.1
o Compatible with
TruePoint, ClearTek, TouchTek Premier, and TouchPen.
TouchWare
OS/2 for 3.0 and 4.0
o Compatible with
TruePoint, ClearTek, TouchTek, and TouchPen.
TouchWare
5.32 for MAC
o This driver is
designed for MicroTouch USB ClearTek 3000 and
TouchTek controllers. The operating systems supported
are Mac OS 8.5, 8.5.1, 8.6, and 9.0 on iMac, G3
and G4 systems with USB firmware 1.1 or 1.2. The
following options are accessed through the control
panel: calibration, configuration options and
multiple monitors support for up to 4 USB touch
screens. The installation is manual.
LINUX
TouchWare 5.64 SR1 Drivers - ReadMe
File
o Linux
RPM for Red Hat 8.0 - Kernel 2.4.18-14
o
Linux RPM for
Red Hat 9.0 Kernel 2.4.20-8
o
Linux RPM
for Red Hat Enterprise Level 3, Update 4 Kernel
2.4.21-27.EL
o
Linux RPM
for Red Hat Fedora Core 2 Kernel 2.6.5-1.358
o
Linux RPM
for Red Hat Fedora Core 3 Kernel 2.6.9-1.667
o
Linux RPM
for Red Hat Fedora Core 4 Kernel 2.6.11-1.1369_FC4
o
Linux RPM
for SuSE 8.2 Kernel 2.4.20-4GB
o
Linux RPM for
SuSE 9.0 Kernel 2.4.21-99-default
o
Linux RPM
for SuSE 9.1 Kernel 2.6.4-52-default
o
Linux RPM
for SuSE 9.2 Kernel 2.6.8-24-default
o
Linux RPM
for SuSE 10.0 Kernel 2.6.13-15-default
|
