FEATURES
- Designed to Meet Class 2, Div 2 Protection
- Purge/Pressure System
- NEMA 4X (IP66) sealed enclosure
- Water proof and dust proof
- Stainless steel construction
- Mid-size footprint
- Flexible mounting options
- Direct or KVM cabling to
host

CONTACT

HEADQUARTERS
11529 Sun Belt Ct.
Baton Rouge, Louisiana  70809

Phone
800.223.8050
International 001.225.298.0300
Fax
225.297.2440

E-mail
sales@vartechsystems.com

Website
www.vartechsystems.com

 

 

_____________________

Material Specifications

Regulator Body
Zinc w/ Enamel Finish

Regulator Handle & Bowl
Polycarbonate

Rapid Exchange Gauge
ABS Plastic

Tube Fittings & Valves
316 SS Forged Body

Tubing
316 SS 1/4” .035 Welded

System Nameplates
Silk screened Lexan® & SS

Fastener Hardware
Zinc Plated and Stainless

Steel
Mounting Plate
316 14 Ga #3 Brush SS

EXP Pressure Switch Body
Anodized Cast Alum.

Enclosure Warning

Nameplate
Silkscreened SS

The VT702ES is a NEMA 4X (IP66) LCD designed to meet Class 2, Div 2 protection.
The purge system uses a pressure switch to automatically trigger alarms in case
of pressure loss.
Slim and Economical
With its moderate weight and small footprint, the VT702ES is ideal for
applications where both space and budget are limited.
Durable
The VT702ES is fully enclosed in a sealed, NEMA 4X (IP66), easy-open, stainless steel case. The chassis has no external vents, so nothing can get under its skin,
including weather, dust, dirt, moisture, oil, chemicals or other harsh
contaminants. A hard-anodized aluminum heat exchanger and internal heat
management system keep it cool in environments where ambient temperatures
approach 50°C/122°F -- without using outside air. With its lightweight yet rugged construction, and either pre-cabled or bulkhead connectors, the VT702ES is easily mounted on walls, stands, arms or other industrial equipment. With optional brackets, it conforms to VESA flat panel mounting standards.

Display
19 Inch TFT, LCD screen shielded by a
Tempered Glass Protective Overlay

Resolution Capabilities
SXGA

Pixel Format
1280 x 1024*

Standard Connection
VGA, Serial, Power

Enclosure
316 Stainless Steel Sealed Anodized Aluminum Heat Sink
12" Handles

Environmental/Thermal
NEMA 4X (IP66)
Water Proof
Dust Proof
50ºC/122ºF
IP65

Purge System Mounting to Side (L/R), Top or Bottom

_____________________________________________________________

Z Type Purge System w/ Pressure Switch (Class 2, Div 2 Protection)

This Rapid Exchange® enclosure pressurization that operates on a supply of
compressed instrument air or inert gas. It regulates and monitors pressure within
sealed (protected) enclosure(s), in order to prevent combustible dust
accumulation or remove and prevent flammable gas or vapor accumulations. In
Class II areas, the system maintains a "safe" (1.0") pressure. This process
reduces the hazardous (classified) area rating within the enclosure(s), in
accordance with the NEC - NFPA 70, Article 500, NFPA 496 and ISA 12.4.

Shipping Weight
10 lb

Operating Temp. Range
40F to 120F

Supply Pressure Range
5 - 120 psi

Supply requirements
Clean air or inert gas

Safe Pressure Setpoint
.25"/1" @ safe pressure

Safe Pressure Flow Rate
0.1 - 3.5 SCFH - Enclosure integrity determines actual flow rate

System Supply Port
1/4" FPT

Enclosure Supply Fitting
1/4" tube fitting

Enclosure Reference Fitting
1/4" tube fitting

EPCU Conduit Port Size
1/2" FPT

EPCU Power Requirements
120 VAC 15amps

Dimensions
12" (H) x 8" (W) x 7.25" (D)
Height & Width dimensions reflect mounting plate measurements. Depth
dimensions reflects overall measurement of system, including components.

Mounting
Side (L/R), Top or Bottom

OPERATION
In accordance with system instructions, start-up requires air supply to be engaged
and enclosure power to be de-energized. In Class II areas, all dust must be
removed from the enclosure(s). The enclosure protection vent (if used) must be
tested and enclosure(s) must be sealed. The enclosure pressure control regulator is then used to set a safe reading on the enclosure pressure gauge. In Class II areas, power can be energized when safe pressure is stable. Loss of safe pressure in Class I or II areas requires immediate attention, unless power is de-energized. WPS style systems include an explosion proof differential pressure switch with form "C" contacts for audible or visual alarm systems.