FEATURES
- Designed to Meet Class1,
Div1
- NEMA 4x sealed enclosure
- Water proof and dust proof
- Stainless steel construction
- Mid-size footprint
- Flexible mounting options
- Direct or KVM cabling to
host
- LCD screen shielded by a Tempered Glass Protective Overlay

CONTACT

HEADQUARTERS
11529 Sun Belt Ct.
Baton Rouge, Louisiana  70809

Phone
800.223.8050
International 001.225.298.0300
Fax
225.297.2440

E-mail
sales@vartechsystems.com

Website
www.vartechsystems.com

 

 

_____________________

Material Specifications

Regulator Body
Zinc w/ Enamel Finish

Regulator Handle
Polycarbonate

Enclosure Pressure Gauge
Alum. w/ Enamel Finish

Tube Fittings
316 SS Forged Body

Tubing
316 SS 1/4" .035 Welded

System Nameplates
Silk screened Lexan® & SS

Fastener Hardware
SS Screws & Bolts

Mounting Plate
316 14 Ga #3 Brush SS

EPCU Enclosed Body
Bead Blast Cast Alum.

Enclosure Warning

Nameplate
Silkscreened SS

Lexan® is a registered trademark of the
General Electric Company.

Rugged, mid-size monitors that can be used as front-office PCs or in hazardous
area. The display is an ideal NEMA 4X (IP66) solution for HMI.
Slim and Economical
With its moderate weight and small footprint, the VT950ES series is ideal for
applications where both space and budget are limited.
Durable
The VT950ES monitors is fully enclosed in sealed, NEMA 4X (IP66), easy-open,
stainless steel cases. The chassis has no external vents, so nothing can get
under its skin, including weather, dust, dirt, moisture, oil, chemicals or other
harsh contaminants. A hard-anodized cast aluminum heat exchanger and
internal heat management system keep it cool in environments where ambient
temperatures approach 50°C/122°F -- without using outside air. With its lightweight yet rugged construction, and either pre-cabled or bulkhead connectors, the VT950ES display is easily mounted on walls, stands, arms or other industrial equipment. The display is available with optional brackets, that conforms to VESA flat panel mounting standards.

Display
19 Inch TFT, LCD screen shielded by a Tempered Glass Protective Overlay

Resolution Capabilities
SXGA

Pixel Format
1280 x 1024*

Standard Connection
VGA, Serial, Power

Enclosure
316 Stainless Steel Sealed Anodized Aluminum Heat Sink 12" Handles

Environmental/Thermal
NEMA 4X (IP66)
Water Proof
Dust Proof
50ºC/122ºF
IP65

Purge System Mounting to Side (L/R), Top or Bottom

_____________________________________________________________

Purge System w/ Pressure Switch (Class 1, Div 1 Protection)

This Rapid Exchange® purging system operates on a supply of
compressed instrument air or inert gas. It regulates and monitors pressure
within sealed (protected) enclosure(s), in order to prevent combustible
dust accumulation or remove and prevent flammable gas or vapor
accumulations. The system accomplishes four air exchanges and maintains
a “safe” (0.25”) pressure. The system includes an Electrical Power Control
Unit (EPCU) that monitors system operation and controls enclosure power.
All start-up requirements must be satisfied before the EPCU will energize
power to the enclosure(s). These processes reduce the hazardous
(classified) area rating within the enclosure(s), in accordance with the NEC
- NFPA 70, Article 500, NFPA 496 and ISA 12.4.

Weight
38lb

Temp. Range
-20F to 120F

Supply Pressure Range
5 - 120 psi

Supply requirements
Clean air or inert gas

Safe Pressure Setpoint
.25” / 1.0”

Safe Pressure Flow Rate
0.1 - 3.5 SCFH - Enclosure integrity
determines actual flow rate

Safe Pressure Flow Rate
4 SCFM / 240 SCFH - With regulator
set to 60 psi min. during exchange

Exchange Time
As required - Time required to exchange 4 volumes within the
enclosure(s), based on actual measured safe pressure flow rate or 5 minutes,
whichever is greater

System Supply Port
1/4” tube fitting

Enclosure Supply Fitting
1/4” tube fitting

Enclosure Reference Fitting
1/4” tube fitting

EPCU Conduit Port Size
1/2” FPT

EPCU Power Requirements
120 VAC 60Hz 10

EPCU Power Consumption
500mA

Dimensions
20" (H) x 11" (W) x 10.5" (D)
Height & Width dimensions reflect mounting plate measurements. Depth
dimensions reflects overall measurement of system, including components.

Mounting
Side (L/R), Top or Bottom

OPERATION

In accordance with system instructions, start-up requires air supply to be engaged
and EPCU power to be energized. The system must perform an exchange cycle
(determined by the safe pressure flow rate — 5 minutes minimum) before power
can be energized. Loss of safe pressure causes the EPCU to deenergize power to
the protected enclosure(s). The purge system includes an explosion proof
differential pressure switch with form “C” contacts for audible of visual alarm
systems.